Modular tool rack from JinTa, a professional steel shelving manufacturer in Suzhou, China. Easy to reconfigure and extend for workshops, garages and hardware aisles.
Tool racks use a solid back panel to brace the frame and close the rear of the bay, so the structure stays rigid and small parts cannot fall behind the shelves. JTD Jinta builds them in cold rolled steel with 30x70 or 30x80 mm uprights at 2.0 to 2.5 mm, 0.6 to 0.8 mm shelves, 0.5 to 1.0 mm back panels and 1.8 to 3.0 mm brackets, in 1200x500x2400 mm single sided, 1200x1000x1800 mm double sided and 1000x500x1800 mm end shelf standard bays or any size you specify. Shelf pitch re-sets without tools, frames ship knocked down for container efficiency, and colour and branding can be built to order.
Tap any image to take a closer look, then send an enquiry on the ones that suit your store.
Products for this category are coming soon. Please contact us for the full catalogue.
Product names follow our catalogue. Sizes, colours and configuration are customizable and confirmed with you by our team.
These are real fit-outs built with JinTa shelving and store fittings, across department supermarkets, chain stores and specialty retail. Tap any photo to enlarge.
Choosing store fittings is the start of a long relationship. After 28 years as a professional shop-fittings manufacturer, what buyers value most is how we work with them, not just the steel.
From choosing the right products for your store through to the rest of your fit-out and long-term cooperation, we aim for a one-stop experience.
We work in a thoughtful, flexible way to meet different needs, adapting to your store rather than pushing a fixed catalogue.
Our products are designed with a self-supporting structure and high quality, and are backed by quick after-sales service when you need it.
Tell us about your store and the shelving you have in mind. Our team will follow up with the right options for your space, the JinTa way: one-stop and flexible around your needs.
Fitting out a whole store? These pages walk through the full configuration by store type: Grocery Store Shelving、Convenience Store Shelving、Retail Store Fixtures.
A tool rack is a cold rolled steel shelving bay with a solid back panel, uprights, shelves and brackets. The panel closes the rear and braces the frame, so small parts cannot fall behind the shelves. Standard bays are 1200x500x2400 mm single sided, 1200x1000x1800 mm double sided and 1000x500x1800 mm end shelves.
No — a pegboard is a perforated panel that hangs light hand tools from hooks and carries almost no shelf load. A tool rack is a load bearing bay: a solid back panel, 0.6 to 0.8 mm shelves and 1.8 to 3.0 mm brackets, so it takes power tools, cases and boxed fixings that a pegboard will not support.
Frames arrive as knock-down kits and go together on site without special tooling. Stand the uprights, fix the brackets and shelves level by level, then fit the back panel to close and brace the bay. Shelf pitch can be re-set later without taking the frame apart, so the layout follows the tools you actually store.
Specify it by the load, not by the catalogue. Uprights run 30x70 or 30x80 mm at 2.0 to 2.5 mm, shelves 0.6 to 0.8 mm, back panels 0.5 to 1.0 mm and brackets 1.8 to 3.0 mm. Heavy cases and power tools sit at the thicker end; hand tools and loose fixings are fine at the lighter end.
Choose a tool rack when small parts, mixed tool sizes and a tidy front of house matter: the solid back panel stops items falling behind the bay and shelf levels can be re-pitched by tool type. Boltless is the simpler answer for cartons, parts bins and back-of-store stock, where a back panel adds nothing.
